Designed for a variety of applications -these
systems are made specifically for individual and multi-unit homes,
apartments and offices, or anywhere higher volume of water is needed. These
point of entry systems purify water at all water outlets for
your entire residence or building. (Shower,
Bathroom, Laundry, Kitchen). This
ensures safe and clean water for every situation in which infected
water can be ingested - through the mouth, nose, eyes or skin. The
3000 series hooks up easily. Hardware, flow meter and instructions
are included. This system is ideal for Ex-pat residences, office buildings
and apartments.
Note: A point of entry system
will save the user significant money and maintenance, as only one
system is needed for the entire residence or business. (No need to
buy multiple units.) Generally,
filters need to be changed only once per year (pre and post). Purification
cartridge every two years. The whole process will take about 10 minutes.
These systems start with a three (3) stage configuration:
- A sediment filter to remove particulate matter such as debris,
rust and dirt
- Proprietary Iodinated resin that devitalize viruses,
bacteria, cysts
andmicroorganisms
- Carbon and other filtration media to reduce odor and taste-causing
contaminants such as pesticides / chemicals.
NOTE: Filter options may vary dependent upon specific
water conditions.
Works on demand!
The resin beads contain a “demand release” iodinated
disinfectant which discharges only if contaminants are present. This
is the most advanced microbiological water technology available.
Destroys microorganisms
Devitalizes all waterborne microorganisms and viruses. Effective against
Polio virus, Herpes virus, E. coli bacteria, Vibrio cholera bacteria,
Giardia, Cryptospordium and Anthrax (partial list.)
Highest Quality
Engineered/field tested for use in even the most rugged parts of the
world.
Use with confidence
Technology developed by Kansas State University. Used by NASA, Fortune
100 companies, relief organizations, United States State Department
and hospital travel medicine clinics. Resin is registered with the
EPA (No.35917-2) as a water purification resin.
Potable water on demand
No electricity required.
Please refer to the ‘Benefits’ tab for additional
information |
Commercial
Point of Entry System (Slim Line)
Best application: Residential or small commercial
#BDC-3000SL
Complete System Click here
for pdf spec
sheet
Replacement
Cartridges
#RB-40: 1st Stage sediment filter (Purifies 10,000 - 30,000 liters)
#RP-140: 2nd Stage purification cartridge (Purifies 200,000-300,000
ltrs)
#RB-41: 3rd Stage Carbon block cartridge (Purifies 25,000 - 35,000
liters)
|
 |
|
 |
Ultra
High Volume Commercial Point of Entry System (Big Blue)
Best application: Commercial
#BDC-3000BB Complete System Click here
for pdf spec
sheet
Replacement Cartridges
#RB-50: 1st Stage sediment filter (Purifies 20,000 - 40,000 liters)
#RP-18: 2nd Stage purification cartridge (Purifies 1,000,000 -
1,200,000 liters)
#RB-51: 3rd Stage Carbon block cartridge (Purifies 30,000 - 40,000
liters) |
|
| Heavy
Sediment Removal / Ultra High Volume Commercial Point of Entry
System |
Best
application: High particulate / turbid water source
#BDC-4000BB*
Complete System
System set up: 1" ports,
flow meter, 2 water pressure gauges that monitor pressure drop
between spin down to first sediment filter and main system. Three
shut-off valves that allow very easy sediment filter replacement.
Replacement
Filters/Cartridges |
 |
#FS-15: Spin
down filter (Removes heavy sediment, dirt and rust)
#RS-62: Sediment (Removes finer sediment and particulate matter)
#RB-50: 1st Stage sediment filter (Purifies 20,000 - 40,000 liters)
#RP-18: 2nd Stage purification cartridge (Purifies 1,000,000 - 1,200,000
liters)
#RL-70: 3rd Stage heavy metal / lead reduction (Purifies 30,000 -
40,000 liters)
*All hardware, manuals are included for initial
setup |
|